Crosman SAPR74 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sport und Erholung Crosman SAPR74 herunter. Crosman SAPR74 User Manual [de] [fr] [it] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 3
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
1. Learning the names of the parts of your new soft air gun will help you to understand your owner's man-
ual. Use this manual to increase your enjoyment of this soft air gun.
2. Operating the Safety
A. To Put the Soft Air Gun "ON SAFE"
• Locate the safety on either side of the receiver (Fig. 2).
• Push lever so that the white line on the lever is lined up with the white "SAFE".
Like all mechanical devices, a soft air gun safety can fail. Even when the safety is "ON SAFE", you should continue
to handle the soft air gun safely. NEVER point the soft air gun at any person. NEVER point the soft air gun at
anything you do not intend to shoot.
B. To Take the Soft Air Gun "OFF SAFE"
NOTE: This soft air gun fires in semi or full-auto mode. Full-auto means it will continue to fire plastic BBs as long
as you hold the trigger. Semi-auto means you will have to pull the trigger each time you want to fire a shot.
• Locate the safety on either side of the receiver (Fig. 2).
• Push the lever to the semi-auto fire or full-auto fire position.
• The soft air gun is "OFF SAFE" and ready to fire when pointing to either of these locations.
3. Adjusting the stock
Your soft air gun is shipped with the stock in the closed position and is capable of adjusting to
two other lengths.
Before adjusting the stock make sure your soft air gun is "ON SAFE", (section 2A) and point-
ed in a SAFE DIRECTION.
• With the soft air gun pointed toward the ground (Fig. 3), move the stock release button
toward the left side of the soft air gun and pull the stock until it locks in place.
• If you would like to extend the stock further repeat the steps above.
4. Loading and Unloading Plastic BBs
A. Loading
• Make sure the soft air gun is "ON SAFE" (section 2A).
• Point the soft air gun in a SAFE DIRECTION.
While supporting the BB magazine, push the magazine release lever forward and
remove the magazine (Fig. 4A).
• Slide the magazine cap open (Fig.4B).
• Insert 6 mm plastic BBs.
• Close the magazine cap.
• Flip open the loading door behind the ready tube (Fig. 4B).
• Load 6 mm BBs until this side is full.
• Rotate the wind up wheel to draw plastic BBs up into the ready tube (Fig. 4C). Wind the wheel up to 75 turns
for optimum performance.
• Insert the loaded magazine back into the soft air gun.
B. Unloading Plastic BBs
• Make sure the soft air gun is "ON SAFE" (section 2A).
• Point the soft air gun in a SAFE DIRECTION.
While supporting the BB magazine, push the magazine release lever forward and remove the magazine.
• Slide the magazine cap open.
• Flip open the door on the ready tube.
• Pour out BBs.
• Flip open the loading door behind the ready tube
• Pour out BBs.
• To release the BBs in the ready tube, point the clip down in a safe direction and push back and hold the BB
retainer button.
NOTE: BBs will release rapidly.
• Rotate the wind up wheel to draw BBs into the ready tube.
• Repeat the above steps until all the BBs are out of the magazine.
• Close the magazine cap.
Model Pulse R74
Soft Air Rifle
6mm (.24 cal) Plastic BB
OWNER'S MANUAL
READ ALL INSTRUCTIONS AND WARNINGS IN THIS
MANUAL BEFORE USING THIS SOFT AIR GUN
Distributed by
Crosman Corporation
7629 Routes 5 & 20,
E. Bloomfield, NY 14443
www.crosman.com
1-800-7AIRGUN SAPR74A515
1-800-724-7486
SPECIFICATIONS
PERFORMANCE
Many factors can affect velocity, including brand of projectile, type of projectile and barrel condition.
Mechanism/Action: Electronic
Caliber/Ammunition: 6mm plastic BBs
Reservoir: Up to 525 6mm BBs
Weight: 3.75 lbs (1.70 kg)
Overall Length: up to25.75 inches
Sights: Front: Post
Rear: Adjustable for windage
Barrel: Smooth
Safety: Lever
Velocity: Up to 325 fps (99.06m/s)
REPAIR SERVICE
If your soft air gun needs repair, we recommend that you call Crosman Corporation Customer service at
1-800-724-7486 or 585-657-6161. (International customers should contact their distributor.) DO NOT
ATTEMPT TO DISASSEMBLE IT! Your soft air gun requires special tools and fixtures to repair it. If you
take it apart you probably will not be able to reassemble it correctly. Crosman assumes no warranty
responsibility under such circumstances.
LIMITED 30 DAY WARRANTY
This product is warranted to the retail consumer for 30 days from date of retail purchase against defects in
material and workmanship and is transferable.
WHAT IS COVERED
Replacement parts and labor. Transportation charges to consumer for repaired product.
WHAT IS NOT COVERED
Transportation charges to Crosman for product. Damages caused by abuse, modification or failure to
perform normal maintenance. Any other expense. CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES,
OR INCIDENTAL EXPENSES, INCLUDING DAMAGE TO PROPERTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
WARRANTY CLAIMS
USA
Customers: Attach your name, address, description of problem, phone number and copy of sales receipt
to product. Package and return to Crosman Corporation, Routes 5 & 20, East Bloomfield, NY 14443.
Canadian Customers: Follow packaging procedures above and send to Crosman Parts & Service Depot, 611
Neal Drive, Peterborough, Ontario, K9J 6X7 Canada.
International Customers: Please return product to your nearest distributor. If you do not know your distributor,
please call 585-657-6161 and ask for our International Department for assistance.
IMPLIED WARRANTIES
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 30 DAYS FROM DATE OF RETAIL PURCHASE.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
To the extent any provision of this warranty is prohibited by federal, state, or municipal law which cannot be
preempted, it shall not be applicable. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
CROSMAN is a registered trademark of Crosman Corporation in the United States.
5. Removing the Battery
• Make sure the soft air gun is "ON SAFE" (section 2A).
• Point the soft air gun in a SAFE DIRECTION.
• Locate the locking pin and remove by pushing it from one side to the other (Fig. 5).
• Remove the fore grip
• Disconnect the wire socket.
• Remove the battery
• Put the fore grip back on carefully.
• Re-insert the locking pin pushing it all the way in.
6. Charging the battery.
• Your soft air gun comes with a battery charger to help prolong the life of the battery.
• To charge the battery, follow section 5 on removing the battery.
• Plug the white connector on the battery into the white connector on the battery charger.
• Plug the charger in to a standard 110 outlet.
NOTE: The battery charging time is a MINIMUM of 4 hours and a MAXIMUM of 6 hours. Continuous battery
consumption will allow the soft air gun to shoot for 15-20 minutes. To prolong battery life and maintain the best
shooting performance do not shoot over 5 minutes continuously in the Full Auto Mode. DO NOT OVER-
CHARGE THE BATTERY.
7. Installing/Replacing the Battery
Make sure the soft air gun is "ON SAFE" (section 2A) and the magazine is
removed.
• Point the soft air gun in a SAFE DIRECTION.
Locate the locking pin and remove by pushing it from one side to the other.
• Remove the fore grip.
• Connect the wire socket.
• Lay the battery inside the fore grip (Fig. 6).
• Tuck the battery and wire inside the fore grip.
• Put the fore grip back on carefully.
• Re-insert the locking pin pushing it all the way in
8. Selecting the Hop-Up Mode
Your soft air gun is manufactured with a hop up system. The purpose of this system is to change
the spin on the BB as it leaves the muzzle allowing you to adapt your shot for different distances.
There are two possible adjustments. Push the Hop-Up adjustment switch (Fig. 7) forward for less
spin, move it back for more spin and longer distance.
9. Aiming and Firing Safely
NOTE: This soft air gun fires in semi or full-auto mode. Full-auto means it will continue to fire plastic BBs as long as
you hold the trigger. Semi-auto means you will have to pull the trigger each time you want to fire a shot.
• You and others with you should always wear shooting glasses to protect your eyes.
Always point your soft air gun in a SAFE DIRECTION.
Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or ricochet and hit
someone or something you had not intended to hit. If the plastic BBs should happen to hit a hard surface, DO
NOT re-use those plastic BBs because they could possibly cause damage to your soft air gun.
• Your soft air gun is designed for target shooting and is suited for both indoor and outdoor use. Always
remember to place your target carefully. THINK about what you will hit if you miss the target.
• To adjust your sights: your rear sight has two peep sight settings and two notched sight settings. To
select your preference, simply turn the rear sight until it clicks into the desired position.
• The soft air gun is correctly aimed when the front sight blade is positioned exactly in the center of the
notch or peep of the rear sight. The top of the front sight blade should be even with the top of the notch
or peep in the rear sight. The bulls-eye should appear to rest on the top of the front sight.
• To adjust for windage (left or right) loosen the sight screw on top of the rear sight. Do not remove the
screw, loosen just enough for the sight to have a little play in it. With the gun pointed in a SAFE DIREC-
TION, turn the windage screw on the side of the sight to the left (counter-clockwise) to move the point of
impact to the left. Turn the windage screw to the right (clockwise) to move the point of impact to the right.
• Tighten the sight screw to lock in the setting.
• When you are sure of your target and backstop, and the area around the target is clear, take the soft air
gun "OFF SAFE" (section 2A) and pull the trigger to fire.
10. Maintaining Your Soft Air Gun
• Periodically your soft air gun will require fine tuning and you will need to tighten the screw under the pistol
grip. This is regular maintenance and will help keep your working properly.
• DO NOT MODIFY OR ALTER YOUR SOFT AIR GUN. Tampering with the soft air gun or attempts
to change the soft air gun in any way may make it unsafe to use, may cause serious injury and will
void the warranty.
If you drop your soft air gun, visually check to see that it works properly before you use it again. If anything
seems changed, like a shorter or weaker trigger pull, this may mean parts are worn out or broken. Call Customer
Service at Crosman for assistance before using your soft air gun again.
11. Reviewing Safety
• Do not ever point the soft air gun at any person. Do not ever point the soft air gun at anything you do not
intend to shoot.
Always treat the soft air gun as though it is loaded and with the same respect you would a firearm.
• Always aim in a SAFE DIRECTION. Always keep the muzzle of the soft air gun pointed in a SAFE DIRECTION.
Always keep the soft air gun "ON SAFE" until you are ready to shoot in a SAFE DIRECTION.
Always check to see if the soft air gun is "ON SAFE" and unloaded when getting it from another person or
from storage.
Always keep your finger off the trigger and out of the trigger guard until ready to shoot.
• You and others with you should always wear shooting glasses to protect your eyes.
• If your reading or prescription glasses are not safety glasses, make sure you wear shooting glasses over
your regular glasses.
• Use 6 mm plastic BBs only.
Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or ricochet and hit some-
one or something you had not intended to hit. If the plastic BBs should happen to hit a hard surface, do not reuse
those plastic BBs because they could cause possible damage to your soft air gun.
• Replace the backstop if it becomes worn. Place the backstop in a location that will be safe should the back-
stop fail.
• Do not attempt to disassemble or tamper with your soft airgun. Use an Authorized Service Station.
DO NOT MODIFY OR ALTER YOUR SOFT AIRGUN. Attempts to modify the soft air gun in any way may make
your soft air gun unsafe to use, cause serious injury or death and will void the warranty.
• Using unauthorized repair centers or modifying the function of your soft air gun in any way may be unsafe
and will void your warranty.
• Do not put the soft air gun away loaded. Make sure ALL of the plastic BBs are unloaded from the soft air gun.
Always store this soft air gun in a secure location.
YOU AND OTHERS WITH YOU SHOULD ALWAYS WEAR SHOOTING GLASSES TO PROTECT YOUR EYES.
READ ALL INSTRUCTIONS BEFORE USING.
BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF THIS
SOFT AIR GUN.
Congratulations and thank you for purchasing the Crosman Pulse R74 electronic soft air gun.
Please read this owner's manual completely. Remember to treat this soft air gun with the same
respect you would a firearm. Always carefully follow the safety instructions found in this owner's manual
and keep this manual in a safe place for future use.
If you have any questions regarding your new soft air gun, please contact Crosman Customer
Service at: 1-800-724-7486, 585-657-6161 or www.crosman.com.
Not a toy. Adult supervision required. Misuse or careless use may
cause serious injury, particularly to the eye. May be dangerous up
100 yards (91.44 meters).
WARNING:
STEPS FOR SAFE SHOOTING
1. Learning the Parts Of Your New Soft Air Gun 7. Installing/Replacing the Battery
2. Operating the Safety 8. Selecting the Hop-Up Mode
3. Adjusting the Stock 9. Aiming and Firing Safely
4. Loading and Unloading Plastic BBs 10. Maintaining your Soft Air Gun
5. Removing the Battery 11. Reviewing Safety
6. Charging the Battery
Keep the soft air gun in the "ON SAFE" position until you are actually
ready to shoot. Then turn the safety to the "OFF SAFE" position.
WARNING:
THIS SOFT AIR GUN IS INTENDED FOR USE BY THOSE 16 YEARS OF AGE OR OLDER.
Never assume that because the soft air gun no longer fires a BB and/or the
loading chamber is removed, that a BB is not lodged in the barrel. Always
treat the soft air gun as though it is loaded and with the same respect you would a firearm.
WARNING:
Note: Charge battery at least MINIMUM of 4 hours and a MAXIMUM of 6 hours prior to
initial use. This soft air gun will not operate properly without a fully charged battery. DO
NOT OVERCHARGE BATTERY.
Do not brandish or display this soft air gun in public - it may confuse
people and may be a crime. Police and others may think it is a firearm.
Do not change the coloration and markings to make it look more like a firearm. That is dan-
gerous and may be a crime.
WARNING:
A. Front Sight
B. Double Wind Up Magazine
C. Magazine Release Lever
D. Trigger
E. Safety
F. Three-Position Retractable Stock
G. Stock Release Lever
H. Battery Compartment/Fore Grip
I. Locking Pin
J. Rear Sight
K. Hop Up Adjustment Switch
Fig 2
Fig 3
Use 6 mm plastic BBs only in this soft air gun. Use of any other
ammunition can cause injury to you or damage to the soft air gun.
WARNING:
Fig 4A
Fig 6
Fig 7
Fig 4B
Fig 5
Fig 4C
A
B
C
D
E
F
G
H
I
J
K
Magazine Cap
Loading
Door
BB Retainer
Button
Ready
Tube
Seitenansicht 0
1 2 3

Inhaltsverzeichnis

Seite 1 - OWNER'S MANUAL

1. Learning the names of the parts of your new soft air gun will help you to understand your owner's man-ual. Use this manual to increase your e

Seite 2 - GUIDE D'UTILISATION

1. Connaître les parties de votre nouvelle carabine Soft AirVous comprendrez mieux votre guide d'utilisation si vous connaissez le nom des parti

Seite 3 - MANUAL DEL PROPIETARIO

1. Aprenderse los nombres de las partes de su nuevo rifle de aire suave le ayudará a entender el manualdel propietario. Use este manual para aumentar

Kommentare zu diesen Handbüchern

Keine Kommentare