Crosman 74252 Bedienungsanleitung PDF herunterladen

Model 74252

Laser sight

Owner’s Manual

Read all instructions and Warnings in this manual before using the laser sight.

Centerpoint Precision Optics

7629 Rt 5 & 20

Bloomeld, NY 14469

United States of America

1-866-726-1122 74252-515

LASER RADIATION—

AVOID DIRECT EYE EXPOSURE

Laser Diode

Wavelength: 630-640 nm

Max Output: < 5 mW

Class IIIa

Laser Product

CAUTION: AVOID DIRECT EYE EXPOSURE. Laser emitted from the aperture.

CAUTION: A laser sight is not a toy. It must be used under the supervision of an adult. Improper use

or careless use may cause serious injury, especially to the eyes. Avoid direct eye exposure to the laser

beam.

Always follow the safety instructions found in the owner’s manual and keep these instructions in safe

place for future use.

BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF

THIS LASER SIGHT

1. On/off switch (battery cap)

2. Laser aperture

3. Elevation screw

4. Windage screw

5. Remote switch

6. Mounting screws

7. Dovetail ring

8. Weaver-style ring

1. SELECTING THE CORRECT MOUNT FOR YOUR GUN

The laser attaches to either a 3/8” grooved receiver (dovetail) found on most .22 ries and air guns, or to

a .852” weaver-style base as installed on most center re pistols and ries. The laser is shipped with the

mounting ring for a weaver-style rail installed. If you need to mount your laser to a 3/8” grooved receiver,

loosen the two mount screws, and remove the weaver-style ring and replace it with the dovetail ring.

Dovetail RingWeaver-Style Ring

Mounting Screws Mounting Screws

2. ATTACHING THE MOUNT TO YOUR GUN

BE CERTAIN THAT YOUR GUN IS UNLOADED AND POINTING IN A SAFE DIRECTION.

CAUTION: In order to avoid injury, keep the laser off until you are ready to aim and shoot. Make sure the

laser is off when you mount or remove the sight

1. Slide the appropriate mount onto your gun

2. Insert the laser into the mount, with the on/off switch towards the

back of the gun

3. Turn the mount so that the elevation screw is on top, and the wind-

age screw is on the right side

4. Tighten the mounting screws using the larger hex wrench

3. ACTIVATING THE LASER

CAUTION: AVOID DIRECT EYE EXPOSURE. Laser emitted from the

aperture.

A. INSTALLING THE BATTERIES This laser sight uses 2 (LR44) button cell batteries.

1. Make sure the laser is pointed in a SAFE DIRECTION

2. Remove the battery access cap (power switch) by turning counter-clockwise

3. Place 2 batteries inside (plus side up)

4. Replace the battery access cap by turning clockwise until tight

B. USING THE STANDARD ON/OFF SWITCH

The laser sight is activated by pressing in the button switch until it clicks. It is turned off by the same

procedure.

NOTE: Always be sure to turn off the switch after use to avoid draining the battery. When storing for an

extended period of time, remove the batteries.

C. USING THE REMOTE Momentary ON/OFF Pad

1. Your laser also comes with a remote on/off pad which allows you to turn the unit momentarily on or off

with pressure. To install the pressure switch. Remove the standard battery access cap (on/off switch)

2. Screw in the remote pressure switch

3. Use the enclosed adhesive strips to attach the on/off pad to a convenient location on your gun.The

laser is activated while the pressure pad is pressed

4. The laser is de-activated by relieving the pressure on the pad

4. SIGHTING IN THE LASER

Your laser sight may be adjusted for both windage and elevation. To determine what adjustments must

be made, re 3 shots at a target. If the point of impact is directly in the center of the tartget, then the

laser sight is zeroed. Otherwise the sight needs to be adjusted.

WINDAGE

Using the small hex wrench included in your package, turning the windage adjustment hex screw clock-

wise will move the laser point to the left. While turning the hex screw counter-clockwise will move your

laser point to the right.

ELEVATION

Using the small hex wrench included in your package, turning the elevation adjustment hex screw clock-

wise will move the laser point down. While turning the hex screw counter-clockwise will move your point

of impact up.

Note that the adjustments are very sensitive. One half rotation, 180 degrees, will provide approximately

10 inches of movement at 25 yards. After adjustment, carefully re three more shots, make additional

adjustments as necessary.

Specications

Output Power

Class IIIa <5mW

Remote Pressure

Switch

10” in Length

Wavelength

635- 655

Tube Size

19mm

Dot Size

.35” @ 10yds

Length (Laser Only)

2.75 in.

Visible Range

Daytime – 25yds

Nightime – 100

Batteries

Two LR44 Lithium Batteries

Windage/Elevation

Ajustment

+/- 10ft. @ 100 yards

LIMITED LIFETIME WARRANTY ON CENTERPOINT PRODUCTS

Your CenterPoint™ product is warranted to be free of defects in materials and workmanship for the

lifetime of the original owner. This warranty does not cover damages due to fair wear and tear, failure

to provide routine maintenance, and does not include batteries or accessories. This warranty lasts as

long as the original purchaser owns the product, and is not transferable. In the event of a defect under

this warranty, we will, at our option, repair or replace the product provided our inspection indicates

that an original defect exists. CenterPoint reserves the right to replace any product which is no longer

available with a product of comparable value and function. If CenterPoint determines the repair is not

covered under the warranty guidelines, there could be a charge to you for the repair. This is a limited

warranty and does not cover damages caused by misuse, improper handling or installation or mainte-

nance provided by someone other than CenterPoint.

This limited warranty does not include consequential damages, incidental damages, or incidental

expenses, including damage to property or any other expense. CenterPoint disclaims any implied war-

ranties. Some states do not allow the exclusion or limitation of incidental or consequential damages,

or allow limitations on implied warranties so the above limitations or exclusions may not apply to you.

This warranty gives you specic legal rights, and you may also have other rights which vary from state

to state and country to country.

WARRANTY CLAIMS/ REPAIR SERVICE

If your product needs repair, call CenterPoint Customer Service at 1-800-726-1122 or visit our web

site at www.centerpointoptics.com DO NOT ATTEMPT TO DISASSEMBLE IT! Any disassembly or

modication not performed by CenterPoint Precision Optics will void the warranty.

USA Customers: Please contact CenterPoint before shipping your product. Include with product

your name, address, description of problem, phone number and copies of sales receipt and warranty.

A check or money order in the amount of $10.00 to cover the cost of postage and handling is also

required. Package and return to CenterPoint, Crosman Corporation, 7629 Rts. 5 & 20, Bloomeld, NY

14469. CenterPoint will not assume any responsibility for any loss or damage incurred in shipping.

International Customers: Please return product to your nearest distributor. If you do not know your

distributor, please call 585-657-6161 and ask for our International Department for assistance. Ship-

ping and handling costs may apply.

1 2 3

Inhaltsverzeichnis

Seite 1 - Owner’s Manual

Model 74252Laser sightOwner’s ManualRead all instructions and Warnings in this manual before using the laser sight.Centerpoint Precision Optics 7629 R

Seite 2 - Manual del propietario

Centerpoint Modelo 74252Mira láserManual del propietarioLea todas las instrucciones y advertencias de este manual antes de usar esta mira láser.Center

Seite 3 - MANUEL D’UTILISATION

Centerpoint Modèle 74252Viseur laserMANUEL D’UTILISATIONLisez toutes les directives et les mises en garde contenues dans ce guide avant d’utiliser ce

Kommentare zu diesen Handbüchern

Keine Kommentare

Crosman 74252 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Optik Crosman 74252 herunter. Crosman 74252 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Optik Crosman 74252